209CO5/16 021320 Bronze 135° Taper Shank Jobber Drill 5/16 inch
- Write a review
$32.01
ApplicationAngleIcon_DICT_SELDrill point 135°Basic StandardANSICoatingBronzeConnection (shank) descriptionMorse Taper ShankConnection size code machine side (CZC MS)1Cutting diameter - fractional inch (DC)5/16Cutting diameter - inch (DC)0.3125Cutting diameter - millimeter (DC)7.94Drill LengthJobberHand (Cutting direction)RightLength chip flute - fractional inch (LCF)3.1/8Length chip flute - inch (LCF)3.125MaterialHSS-EOverall length - fractional inch (OAL)6.3/8Overall length - millimeter (OAL)161.93Point Angle (SIG)135Spiral formStandard SpiralSurface treatementSteam TemperedUsable length (ULDR)4
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 135° |
| Basic Standard | ANSI |
| Coating | Bronze |
| Connection (shank) description | Morse Taper Shank |
| Connection size code machine side (CZC MS) | 1 |
| Cutting diameter - fractional inch (DC) | 5/16 |
| Cutting diameter - inch (DC) | 0.3125 |
| Cutting diameter - millimeter (DC) | 7.94 |
| Drill Length | Jobber |
| Hand (Cutting direction) | Right |
| Length chip flute - fractional inch (LCF) | 3.1/8 |
| Length chip flute - inch (LCF) | 3.125 |
| Material | HSS-E |
| Overall length - fractional inch (OAL) | 6.3/8 |
| Overall length - millimeter (OAL) | 161.93 |
| Point Angle (SIG) | 135 |
| Spiral form | Standard Spiral |
| Surface treatement | Steam Tempered |
| Usable length (ULDR) | 4 |
209CO5/16
