Dormer E544BA4 5976678 BA Machine Tap Spiral Flute 40° 3FL No.4
- Write a review
$19.77
Basic StandardISO 529Clamping Length - millimeter (LSC)5Clamping width - inch0.1102Clamping width - millimeter (WSC)3.6CoatingBright/STConnection diameter - inch (DCON MS)3.55Connection diameter - millimeter (DCON MS)2.8EDP number204054Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)40Hand (Cutting direction)RightMaterialHSSMaterial applicationM - Stainless steel, P - Steel and cast steelMID number5976678Ordering code ANSIE544BA4Overall length - inch (OAL)1.9685Overall length - millimeter (OAL)50Premachined hole diameter - inch (PHD)0.1181Premachined hole diameter - millimeter (PHD)40ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - inch (TD)0.1417Thread diameter - millimeter (TD)3Thread diameter size (TDZ)BA 4Thread form (THFT)BA - British associationThread pitch - inch (TP)0.026Thread pitch - millimeter (TP)0.66Threading length - inch (THL)0.6496Threading length - millimeter (THL)16.5Usable length (ULDR)2Usable Length - inch (LU)0.6496Usable Length - millimeter (LU)16.5
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 5 |
| Clamping width - inch | 0.1102 |
| Clamping width - millimeter (WSC) | 3.6 |
| Coating | Bright/ST |
| Connection diameter - inch (DCON MS) | 3.55 |
| Connection diameter - millimeter (DCON MS) | 2.8 |
| EDP number | 204054 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 40 |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | M - Stainless steel, P - Steel and cast steel |
| MID number | 5976678 |
| Ordering code ANSI | E544BA4 |
| Overall length - inch (OAL) | 1.9685 |
| Overall length - millimeter (OAL) | 50 |
| Premachined hole diameter - inch (PHD) | 0.1181 |
| Premachined hole diameter - millimeter (PHD) | 40 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - inch (TD) | 0.1417 |
| Thread diameter - millimeter (TD) | 3 |
| Thread diameter size (TDZ) | BA 4 |
| Thread form (THFT) | BA - British association |
| Thread pitch - inch (TP) | 0.026 |
| Thread pitch - millimeter (TP) | 0.66 |
| Threading length - inch (THL) | 0.6496 |
| Threading length - millimeter (THL) | 16.5 |
| Usable length (ULDR) | 2 |
| Usable Length - inch (LU) | 0.6496 |
| Usable Length - millimeter (LU) | 16.5 |
5976678
