Pramet PDKX 0905ZEER-FM:M9340 6756073 Milling Insert - High Feed
- Write a review
$17.89
ChipbreakerFMCoatingM9340Coating processMT-CVDCoating property (CTP)1Cooling effectVery negative effect on tool life - cooling is not recommendedCutting edge length - inch (L)0.354Cutting edge length - millimeter (L)9Depth of cut maximum - inch (APMX)0.079Depth of cut maximum - millimeter (APMX)2Feed maximal - millimeter1.75Feed minimal - millimeter0.5Feed_MAX_IMP_NUM0.069Feed_MIN_IMP_NUM0.02Fixing hole diameter - inch (D1)0.217Fixing hole diameter - millimeter (D1)5.5Inscribed circle diameter - inch (IC)0.531Inscribed circle diameter - millimeter (IC)13.5Insert shape code (SC)P - pentagonalInsert thickness - inch (S)0.215Insert thickness - millimeter (S)5.47Wiper edge length - inch (BS)0.079Wiper edge length - millimeter (BS)2
Specifications
| Chipbreaker | FM |
| Coating | M9340 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Very negative effect on tool life - cooling is not recommended |
| Cutting edge length - inch (L) | 0.354 |
| Cutting edge length - millimeter (L) | 9 |
| Depth of cut maximum - inch (APMX) | 0.079 |
| Depth of cut maximum - millimeter (APMX) | 2 |
| Feed maximal - millimeter | 1.75 |
| Feed minimal - millimeter | 0.5 |
| Feed_MAX_IMP_NUM | 0.069 |
| Feed_MIN_IMP_NUM | 0.02 |
| Fixing hole diameter - inch (D1) | 0.217 |
| Fixing hole diameter - millimeter (D1) | 5.5 |
| Inscribed circle diameter - inch (IC) | 0.531 |
| Inscribed circle diameter - millimeter (IC) | 13.5 |
| Insert shape code (SC) | P - pentagonal |
| Insert thickness - inch (S) | 0.215 |
| Insert thickness - millimeter (S) | 5.47 |
| Wiper edge length - inch (BS) | 0.079 |
| Wiper edge length - millimeter (BS) | 2 |
6756073
