Pramet SIR 0013 M 11-1 6757098 Boring Bar - Threading
- Write a review
$147.04
Body diameter - inch (BD)0.512Body diameter - millimeter (BD)13Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)0.63Connection diameter - millimeter (DCON MS)16Direction of toolRightFunctional height - inch (HF)0.276Functional height - millimeter (HF)7Functional length - inch (LF)5.906Functional length - millimeter (LF)150Functional width - inch (WF)0.354Functional width - millimeter (WF)9Head length - inch (LH)1.26Head length - millimeter (LH)32Inclination angle (LAMS)1Insert group used in the toolTN 11NR.., TN 11NL..Minimum bore diameter - inch (DMIN)0.63Minimum bore diameter - millimeter (DMIN)16Not recomendedMedium machiningPrimary useFinishingShank height - inch (H)0.551Shank height - millimeter (H)14Shank width - inch (B)0.571Shank width - millimeter (B)14.5
Specifications
| Body diameter - inch (BD) | 0.512 |
| Body diameter - millimeter (BD) | 13 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 0.63 |
| Connection diameter - millimeter (DCON MS) | 16 |
| Direction of tool | Right |
| Functional height - inch (HF) | 0.276 |
| Functional height - millimeter (HF) | 7 |
| Functional length - inch (LF) | 5.906 |
| Functional length - millimeter (LF) | 150 |
| Functional width - inch (WF) | 0.354 |
| Functional width - millimeter (WF) | 9 |
| Head length - inch (LH) | 1.26 |
| Head length - millimeter (LH) | 32 |
| Inclination angle (LAMS) | 1 |
| Insert group used in the tool | TN 11NR.., TN 11NL.. |
| Minimum bore diameter - inch (DMIN) | 0.63 |
| Minimum bore diameter - millimeter (DMIN) | 16 |
| Not recomended | Medium machining |
| Primary use | Finishing |
| Shank height - inch (H) | 0.551 |
| Shank height - millimeter (H) | 14 |
| Shank width - inch (B) | 0.571 |
| Shank width - millimeter (B) | 14.5 |
6757098
