Dormer S2073/4X3 7648523 End Mill 3/4 inch
- Write a review
$402.78
Basic StandardDORMER"CoatingZrNCoating property (CTP)0Connection diameter - fractional inch (DCON MS)3/4Connection diameter - inch (DCON MS)0.75Connection diameter - millimeter (DCON MS)19.05Cut lengthMediumCutting diameter - fractional inch (DC)3/4Cutting diameter - inch (DC)0.75Cutting diameter - millimeter (DC)19.05Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)3EDP number7648523Flute count (NOF)2Flute helix angle (FHA)37MaterialHMMaterial applicationN - Non-ferrous metalsMID number7648523Mill ProfileW - Non-ferrous Cutter Type for Soft Malleable MaterialsOrdering code ANSIS2073/4X3Overall length - fractional inch (OAL)6"Overall length - inch (OAL)6Overall length - millimeter (OAL)152.4Radial rake angle (GAMF)8ShankCylindrical shank
Specifications
| Basic Standard | DORMER" |
| Coating | ZrN |
| Coating property (CTP) | 0 |
| Connection diameter - fractional inch (DCON MS) | 3/4 |
| Connection diameter - inch (DCON MS) | 0.75 |
| Connection diameter - millimeter (DCON MS) | 19.05 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 3/4 |
| Cutting diameter - inch (DC) | 0.75 |
| Cutting diameter - millimeter (DC) | 19.05 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 3 |
| EDP number | 7648523 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 37 |
| Material | HM |
| Material application | N - Non-ferrous metals |
| MID number | 7648523 |
| Mill Profile | W - Non-ferrous Cutter Type for Soft Malleable Materials |
| Ordering code ANSI | S2073/4X3 |
| Overall length - fractional inch (OAL) | 6" |
| Overall length - inch (OAL) | 6 |
| Overall length - millimeter (OAL) | 152.4 |
| Radial rake angle (GAMF) | 8 |
| Shank | Cylindrical shank |
7648523
