Dormer E0431/8 5973967 G(BSP) Machine Tap Spiral Flute 45° 3FL 1/8 inch x 28
- Write a review
$44.26
Basic StandardDORMER-ISOClamping Length - millimeter (LSC)9Clamping width - inch0.248Clamping width - millimeter (WSC)9.728CoatingSteam TemperedConnection diameter - inch (DCON MS)8Connection diameter - millimeter (DCON MS)6.3EDP number569917Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973967Ordering code ANSIE0431/8Overall length - inch (OAL)3.5433Overall length - millimeter (OAL)90Premachined hole diameter - inch (PHD)0.3465Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - inch (TD)0.383Thread diameter - millimeter (TD)8.8Thread diameter size (TDZ)1/8Thread form (THFT)G - British standard pipe fastening - G seriesThreading length - inch (THL)0.5906Threading length - millimeter (THL)15Threads per inch (TPI)28Usable length (ULDR)2.5
Specifications
| Basic Standard | DORMER-ISO |
| Clamping Length - millimeter (LSC) | 9 |
| Clamping width - inch | 0.248 |
| Clamping width - millimeter (WSC) | 9.728 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 8 |
| Connection diameter - millimeter (DCON MS) | 6.3 |
| EDP number | 569917 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973967 |
| Ordering code ANSI | E0431/8 |
| Overall length - inch (OAL) | 3.5433 |
| Overall length - millimeter (OAL) | 90 |
| Premachined hole diameter - inch (PHD) | 0.3465 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - inch (TD) | 0.383 |
| Thread diameter - millimeter (TD) | 8.8 |
| Thread diameter size (TDZ) | 1/8 |
| Thread form (THFT) | G - British standard pipe fastening - G series |
| Threading length - inch (THL) | 0.5906 |
| Threading length - millimeter (THL) | 15 |
| Threads per inch (TPI) | 28 |
| Usable length (ULDR) | 2.5 |
5973967
