Dormer S6104.0XD4 6706594 End Mill 4.00 mm x 4.0 mm
- Write a review
$48.65
Basic StandardDORMERCoatingPolishedConnection diameter - inch (DCON MS)0.1575Connection diameter - millimeter (DCON MS)4Corner radius - inch (RE)0.0039Corner radius - millimeter (RE)0.1Cut lengthShortCutting diameter - inch (DC)0.1575Cutting diameter - millimeter (DC)4Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.4724Depth of cut maximum - millimeter (APMX)12EDP number46706594Flute count (NOF)2Flute helix angle (FHA)30MaterialHMMaterial applicationN - Non-ferrous metalsMID number6706594Mill ProfileW - Non-ferrous Cutter Type for Soft Malleable MaterialsOrdering code ANSIS6104.0XD4Overall length - inch (OAL)1.9685Overall length - millimeter (OAL)50Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)20ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DORMER |
| Coating | Polished |
| Connection diameter - inch (DCON MS) | 0.1575 |
| Connection diameter - millimeter (DCON MS) | 4 |
| Corner radius - inch (RE) | 0.0039 |
| Corner radius - millimeter (RE) | 0.1 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.1575 |
| Cutting diameter - millimeter (DC) | 4 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.4724 |
| Depth of cut maximum - millimeter (APMX) | 12 |
| EDP number | 46706594 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | N - Non-ferrous metals |
| MID number | 6706594 |
| Mill Profile | W - Non-ferrous Cutter Type for Soft Malleable Materials |
| Ordering code ANSI | S6104.0XD4 |
| Overall length - inch (OAL) | 1.9685 |
| Overall length - millimeter (OAL) | 50 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 20 |
| Shank | Cylindrical shank DIN 6535 HA |
6706594
