Dormer E011M6X.75 5974486 Machine Tap Spiral Point 3FL M6 x 0.75 mm
- Write a review
$28.68
Basic StandardISO 529Clamping Length - millimeter (LSC)8Clamping width - fractional inch (WSC)5Clamping width - inch0.1969CoatingSteam TemperedConnection diameter - inch (DCON MS)6.3EDP number568415Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5974486Ordering code ANSIE011M6X.75Overall length - inch (OAL)2.5984Overall length - millimeter (OAL)66Premachined hole diameter - inch (PHD)0.2087Premachined hole diameter - millimeter (PHD)5.3ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)6Thread form (THFT)MF - Metric fineThread pitch - inch (TP)0.0295Thread pitch - millimeter (TP)0.75Threading length - inch (THL)0.5118Threading length - millimeter (THL)13Tolerance limitD5Usable length (ULDR)2.5Usable Length - inch (LU)1.0236Usable Length - millimeter (LU)26
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 8 |
| Clamping width - fractional inch (WSC) | 5 |
| Clamping width - inch | 0.1969 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 6.3 |
| EDP number | 568415 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5974486 |
| Ordering code ANSI | E011M6X.75 |
| Overall length - inch (OAL) | 2.5984 |
| Overall length - millimeter (OAL) | 66 |
| Premachined hole diameter - inch (PHD) | 0.2087 |
| Premachined hole diameter - millimeter (PHD) | 5.3 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 6 |
| Thread form (THFT) | MF - Metric fine |
| Thread pitch - inch (TP) | 0.0295 |
| Thread pitch - millimeter (TP) | 0.75 |
| Threading length - inch (THL) | 0.5118 |
| Threading length - millimeter (THL) | 13 |
| Tolerance limit | D5 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 1.0236 |
| Usable Length - millimeter (LU) | 26 |
5974486
