Dormer E605M3 5977835 Machine Tap Extra Long Spiral Flute 40° 2FL M3 x 0.50 mm
- Write a review
$74.45
Basic StandardISO 2283Clamping Length - millimeter (LSC)5Clamping width - inch0.0984Clamping width - millimeter (WSC)2.5CoatingBrightConnection diameter - inch (DCON MS)0.124Connection diameter - millimeter (DCON MS)3.15EDP number123843Flute count (NOF)2Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)40Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5977835Ordering code ANSIE605M3Overall length - inch (OAL)2.5984Overall length - millimeter (OAL)66Premachined hole diameter - inch (PHD)0.0984Premachined hole diameter - millimeter (PHD)2.5ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter size (TDZ)3Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0197Thread pitch - millimeter (TP)0.5Threading length - inch (THL)0.3543Threading length - millimeter (THL)9Usable length (ULDR)2Usable Length - inch (LU)0.8268Usable Length - millimeter (LU)21
Specifications
| Basic Standard | ISO 2283 |
| Clamping Length - millimeter (LSC) | 5 |
| Clamping width - inch | 0.0984 |
| Clamping width - millimeter (WSC) | 2.5 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.124 |
| Connection diameter - millimeter (DCON MS) | 3.15 |
| EDP number | 123843 |
| Flute count (NOF) | 2 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 40 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5977835 |
| Ordering code ANSI | E605M3 |
| Overall length - inch (OAL) | 2.5984 |
| Overall length - millimeter (OAL) | 66 |
| Premachined hole diameter - inch (PHD) | 0.0984 |
| Premachined hole diameter - millimeter (PHD) | 2.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter size (TDZ) | 3 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0197 |
| Thread pitch - millimeter (TP) | 0.5 |
| Threading length - inch (THL) | 0.3543 |
| Threading length - millimeter (THL) | 9 |
| Usable length (ULDR) | 2 |
| Usable Length - inch (LU) | 0.8268 |
| Usable Length - millimeter (LU) | 21 |
5977835
