Pramet CNMA 544:T5315 6922788 Turning Insert - Negative
- Write a review
$16.80
ChipbreakerNo chipbreakerCoatingT5315Coating processMT-CVDCoating property (CTP)1Cooling effectPositive effect on tool life - cooling is recommendedCorner radius - inch (RE)0.063Corner radius - millimeter (RE)1.6Cutting edge length - inch (L)0.634Cutting edge length - millimeter (L)16.1Depth of cut maximum - inch (APMX)0.335Depth of cut maximum - millimeter (APMX)8.5Depth of cut minimum - inch (APMN)0.063Depth of cut minimum - millimeter (APMN)1.6Feed maximal - millimeter0.6Feed minimal - millimeter0.1Feed_MAX_IMP_NUM0.024Feed_MIN_IMP_NUM0.004Fixing hole diameter - inch (D1)0.25Fixing hole diameter - millimeter (D1)6.35Inscribed circle diameter - inch (IC)0.625Inscribed circle diameter - millimeter (IC)15.875Insert thickness - millimeter (S)6.35
Specifications
| Chipbreaker | No chipbreaker |
| Coating | T5315 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE) | 0.063 |
| Corner radius - millimeter (RE) | 1.6 |
| Cutting edge length - inch (L) | 0.634 |
| Cutting edge length - millimeter (L) | 16.1 |
| Depth of cut maximum - inch (APMX) | 0.335 |
| Depth of cut maximum - millimeter (APMX) | 8.5 |
| Depth of cut minimum - inch (APMN) | 0.063 |
| Depth of cut minimum - millimeter (APMN) | 1.6 |
| Feed maximal - millimeter | 0.6 |
| Feed minimal - millimeter | 0.1 |
| Feed_MAX_IMP_NUM | 0.024 |
| Feed_MIN_IMP_NUM | 0.004 |
| Fixing hole diameter - inch (D1) | 0.25 |
| Fixing hole diameter - millimeter (D1) | 6.35 |
| Inscribed circle diameter - inch (IC) | 0.625 |
| Inscribed circle diameter - millimeter (IC) | 15.875 |
| Insert thickness - millimeter (S) | 6.35 |
6922788
