Dormer E500M22NO2 5975639 Machine Tap Straight Flute 4FL M22 x 2.50 mm
- Write a review
$105.79
Basic StandardISO 529Clamping Length - millimeter (LSC)16Clamping width - fractional inch (WSC)12.5Clamping width - inch0.4921CoatingBrightConnection diameter - inch (DCON MS)0.6299Connection diameter - millimeter (DCON MS)16EDP number94167Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5975404Ordering code ANSIE500M2.2NO2Overall length - inch (OAL)4.6457Overall length - millimeter (OAL)118Premachined hole diameter - inch (PHD)0.7677Premachined hole diameter - millimeter (PHD)19.5ShankCylindrical shank with SquareThread diameter size (TDZ)22Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0984Thread pitch - millimeter (TP)2.5Threading length - inch (THL)1.1417Threading length - millimeter (THL)29Usable length (ULDR)1.5
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 16 |
| Clamping width - fractional inch (WSC) | 12.5 |
| Clamping width - inch | 0.4921 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.6299 |
| Connection diameter - millimeter (DCON MS) | 16 |
| EDP number | 94167 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5975404 |
| Ordering code ANSI | E500M2.2NO2 |
| Overall length - inch (OAL) | 4.6457 |
| Overall length - millimeter (OAL) | 118 |
| Premachined hole diameter - inch (PHD) | 0.7677 |
| Premachined hole diameter - millimeter (PHD) | 19.5 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 22 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0984 |
| Thread pitch - millimeter (TP) | 2.5 |
| Threading length - inch (THL) | 1.1417 |
| Threading length - millimeter (THL) | 29 |
| Usable length (ULDR) | 1.5 |
5975639
