Dormer A51015/64 5970412 ADX Jobber Drill DIN 338 15/64 inch
- Write a review
$22.91
ApplicationAngleIcon_DICT_SELDrill point 130°Basic StandardDIN 338CoatingTiNCoating processPVDCoating property (CTP)1Connection (shank) descriptionCylindrical shankConnection diameter - inch (DCON MS)0.2343Connection diameter - millimeter (DCON MS)5.95Cutting diameter - fractional inch (DC)15/64Cutting diameter - inch (DC)0.2344Cutting diameter - millimeter (DC)5.95Cutting diameter tolerance class (TCDC)h8Drill LengthJobberEDP number169049Hand (Cutting direction)RightLength chip flute - inch (LCF)2.2441Length chip flute - millimeter (LCF)57MaterialHSSMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number5970412Ordering code ANSIA51015/64Overall length - inch (OAL)3.6614Overall length - millimeter (OAL)93Point Angle (SIG)130Spiral formQuick Spiral Flute Design 32°- 40°Usable length (ULDR)4
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 130° |
| Basic Standard | DIN 338 |
| Coating | TiN |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Connection (shank) description | Cylindrical shank |
| Connection diameter - inch (DCON MS) | 0.2343 |
| Connection diameter - millimeter (DCON MS) | 5.95 |
| Cutting diameter - fractional inch (DC) | 15/64 |
| Cutting diameter - inch (DC) | 0.2344 |
| Cutting diameter - millimeter (DC) | 5.95 |
| Cutting diameter tolerance class (TCDC) | h8 |
| Drill Length | Jobber |
| EDP number | 169049 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 2.2441 |
| Length chip flute - millimeter (LCF) | 57 |
| Material | HSS |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5970412 |
| Ordering code ANSI | A51015/64 |
| Overall length - inch (OAL) | 3.6614 |
| Overall length - millimeter (OAL) | 93 |
| Point Angle (SIG) | 130 |
| Spiral form | Quick Spiral Flute Design 32°- 40° |
| Usable length (ULDR) | 4 |
5970412