Pramet 802D-1187-237-S125 6801111 Indexable Drill 2 x D
- Write a review
$530.56
Adjustment limit maximum - inch (ADJLX)0.02Adjustment limit minimum - inch (ADJLN)0.014Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)1.25Connection diameter - millimeter (DCON MS)31.8Connection diameter tolerance machine side (TCDCONMS)h6Cooling (CSP)1Cutting diameter - inch (DC)1.187Cutting diameter - millimeter (DC)30.1Depth of cut maximum - inch (APMX)2.374Overall length - inch (OAL)5.72Overall length - millimeter (OAL)145Protruding length - inch (LPR)3.358ShankCylindrical Shank ISO 9766Shank length - inch (LS)2.362Usable length (ULDR)2Usable Length - inch (LU)2.669
Specifications
| Adjustment limit maximum - inch (ADJLX) | 0.02 |
| Adjustment limit minimum - inch (ADJLN) | 0.014 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 1.25 |
| Connection diameter - millimeter (DCON MS) | 31.8 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Cooling (CSP) | 1 |
| Cutting diameter - inch (DC) | 1.187 |
| Cutting diameter - millimeter (DC) | 30.1 |
| Depth of cut maximum - inch (APMX) | 2.374 |
| Overall length - inch (OAL) | 5.72 |
| Overall length - millimeter (OAL) | 145 |
| Protruding length - inch (LPR) | 3.358 |
| Shank | Cylindrical Shank ISO 9766 |
| Shank length - inch (LS) | 2.362 |
| Usable length (ULDR) | 2 |
| Usable Length - inch (LU) | 2.669 |
6801111
