Dormer S9028.0 5983046 End Mill 8.00 mm
- Write a review
$43.51
Basic StandardDORMERCoatingBrightConnection diameter - inch (DCON MS)0.315Connection diameter - millimeter (DCON MS)8Corner chamfer width - millimeter (CHW)0.13Cut lengthMediumCutting diameter - inch (DC)0.315Cutting diameter - millimeter (DC)8Cutting diameter tolerance class (TCDC)h10Depth of cut maximum - inch (APMX)0.748Depth of cut maximum - millimeter (APMX)19EDP number132913Flute count (NOF)2Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5983046Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS9028.0Overall length - inch (OAL)2.4803Overall length - millimeter (OAL)63Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)12ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DORMER |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.315 |
| Connection diameter - millimeter (DCON MS) | 8 |
| Corner chamfer width - millimeter (CHW) | 0.13 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.315 |
| Cutting diameter - millimeter (DC) | 8 |
| Cutting diameter tolerance class (TCDC) | h10 |
| Depth of cut maximum - inch (APMX) | 0.748 |
| Depth of cut maximum - millimeter (APMX) | 19 |
| EDP number | 132913 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5983046 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S9028.0 |
| Overall length - inch (OAL) | 2.4803 |
| Overall length - millimeter (OAL) | 63 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 12 |
| Shank | Cylindrical shank DIN 6535 HA |
5983046
