Dormer C1235/16 5983898 Slot Drill 5/16 inch
- Write a review
$37.06
Basic StandardDIN 844 KCoatingBrightConnection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Connection diameter tolerance machine side (TCDCONMS)h6Cut lengthShortCutting diameter - fractional inch (DC)5/16Cutting diameter - inch (DC)0.3125Cutting diameter - millimeter (DC)7.94Cutting diameter tolerance class (TCDC)e8Depth of cut maximum - inch (APMX)0.748Depth of cut maximum - millimeter (APMX)19EDP number640067Flute count (NOF)2Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5983898Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIC1235/16Overall length - inch (OAL)2.7165Overall length - millimeter (OAL)69Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)12ShankWeldon shank DIN 1835B
Specifications
| Basic Standard | DIN 844 K |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Cut length | Short |
| Cutting diameter - fractional inch (DC) | 5/16 |
| Cutting diameter - inch (DC) | 0.3125 |
| Cutting diameter - millimeter (DC) | 7.94 |
| Cutting diameter tolerance class (TCDC) | e8 |
| Depth of cut maximum - inch (APMX) | 0.748 |
| Depth of cut maximum - millimeter (APMX) | 19 |
| EDP number | 640067 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5983898 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | C1235/16 |
| Overall length - inch (OAL) | 2.7165 |
| Overall length - millimeter (OAL) | 69 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
5983898
