Dormer E0211 5974297 UNC Machine Tap Spiral Point 4FL 1 inch x 8
- Write a review
$184.15
Basic StandardISO 529Clamping Length - millimeter (LSC)18Clamping width - fractional inch (WSC)14Clamping width - inch0.5512CoatingSteam TemperedConnection diameter - inch (DCON MS)18Coolant supply property (CSP)25.4EDP number569238Flute count (NOF)4Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5974297Ordering code ANSIE0211Overall length - inch (OAL)5.1181Overall length - millimeter (OAL)130Premachined hole diameter - inch (PHD)0.876Premachined hole diameter - millimeter (PHD)22.25ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - inch (TD)1Thread diameter - millimeter (TD)25.4Thread diameter size (TDZ)1"Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)1.378Threading length - millimeter (THL)35Threads per inch (TPI)8Tolerance limitH6Usable length (ULDR)2.5
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 18 |
| Clamping width - fractional inch (WSC) | 14 |
| Clamping width - inch | 0.5512 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 18 |
| Coolant supply property (CSP) | 25.4 |
| EDP number | 569238 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5974297 |
| Ordering code ANSI | E0211 |
| Overall length - inch (OAL) | 5.1181 |
| Overall length - millimeter (OAL) | 130 |
| Premachined hole diameter - inch (PHD) | 0.876 |
| Premachined hole diameter - millimeter (PHD) | 22.25 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - inch (TD) | 1 |
| Thread diameter - millimeter (TD) | 25.4 |
| Thread diameter size (TDZ) | 1" |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 1.378 |
| Threading length - millimeter (THL) | 35 |
| Threads per inch (TPI) | 8 |
| Tolerance limit | H6 |
| Usable length (ULDR) | 2.5 |
5974297
