Dormer C36710.0 5983973 Slot Drill 10.00 mm
- Write a review
$50.91
Basic StandardDIN 327 DCoatingALCRONACoating property (CTP)1Connection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Connection diameter tolerance machine side (TCDCONMS)h6Cut lengthExtra shortCutting diameter - inch (DC)0.3937Cutting diameter - millimeter (DC)10Cutting diameter tolerance class (TCDC)e8Depth of cut maximum - inch (APMX)0.5118Depth of cut maximum - millimeter (APMX)13EDP number355268Flute count (NOF)3Flute helix angle (FHA)40MaterialHSS-E-PMMaterial applicationM - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number5983973Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.374Neck diameter - millimeter (DN)9.5Ordering code ANSIC36710.0Overall length - inch (OAL)2.4803Overall length - millimeter (OAL)63Peripheral effective cutting edge count (ZEFP)3Radial rake angle (GAMF)15ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)22.5
Specifications
| Basic Standard | DIN 327 D |
| Coating | ALCRONA |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 0.3937 |
| Cutting diameter - millimeter (DC) | 10 |
| Cutting diameter tolerance class (TCDC) | e8 |
| Depth of cut maximum - inch (APMX) | 0.5118 |
| Depth of cut maximum - millimeter (APMX) | 13 |
| EDP number | 355268 |
| Flute count (NOF) | 3 |
| Flute helix angle (FHA) | 40 |
| Material | HSS-E-PM |
| Material application | M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5983973 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.374 |
| Neck diameter - millimeter (DN) | 9.5 |
| Ordering code ANSI | C36710.0 |
| Overall length - inch (OAL) | 2.4803 |
| Overall length - millimeter (OAL) | 63 |
| Peripheral effective cutting edge count (ZEFP) | 3 |
| Radial rake angle (GAMF) | 15 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 22.5 |
5983973
