Dormer E412M6 7441119 Machine Tap Spiral Flute 48° Back Tapered Yellow Shark Shark M6 x 1.00 mm
- Write a review
$40.90
Basic StandardDIN 371Clamping Length - millimeter (LSC)8Clamping width - inch0.1929Clamping width - millimeter (WSC)4.9CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)6Connection diameter - millimeter (DCON MS)4.9EDP number7441119Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)48Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number7441119Ordering code ANSIE412M6Overall length - inch (OAL)3.1496Overall length - millimeter (OAL)80Premachined hole diameter - inch (PHD)0.1969Premachined hole diameter - millimeter (PHD)48ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)5Thread diameter size (TDZ)6Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0394Thread pitch - millimeter (TP)1Threading length - inch (THL)0.3937Threading length - millimeter (THL)10Usable length (ULDR)3Usable Length - inch (LU)1.1811Usable Length - millimeter (LU)30
Specifications
| Basic Standard | DIN 371 |
| Clamping Length - millimeter (LSC) | 8 |
| Clamping width - inch | 0.1929 |
| Clamping width - millimeter (WSC) | 4.9 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 6 |
| Connection diameter - millimeter (DCON MS) | 4.9 |
| EDP number | 7441119 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 48 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 7441119 |
| Ordering code ANSI | E412M6 |
| Overall length - inch (OAL) | 3.1496 |
| Overall length - millimeter (OAL) | 80 |
| Premachined hole diameter - inch (PHD) | 0.1969 |
| Premachined hole diameter - millimeter (PHD) | 48 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 5 |
| Thread diameter size (TDZ) | 6 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0394 |
| Thread pitch - millimeter (TP) | 1 |
| Threading length - inch (THL) | 0.3937 |
| Threading length - millimeter (THL) | 10 |
| Usable length (ULDR) | 3 |
| Usable Length - inch (LU) | 1.1811 |
| Usable Length - millimeter (LU) | 30 |
7441119