Dormer R45311/16 5979995 140° Coolant Drill 11/16 inch
- Write a review
$723.52
ApplicationAngleIcon_DICT_SELDrill point 140°Basic StandardDIN 6537 LCoatingTiAlNCoating processPVDCoating property (CTP)1Connection (shank) descriptionCylindrical shank DIN 6535 HAConnection diameter - inch (DCON MS)0.7087Connection diameter - millimeter (DCON MS)18Connection diameter tolerance machine side (TCDCONMS)h6Coolant supply property (CSP)1Cutting diameter - fractional inch (DC)11/16Cutting diameter - inch (DC)0.6874Cutting diameter - millimeter (DC)17.46Cutting diameter tolerance class (TCDC)m7Drill LengthJobberEDP number623626Hand (Cutting direction)RightLength chip flute - inch (LCF)3.5827Length chip flute - millimeter (LCF)91MaterialHMMID number5979995Ordering code ANSIR45311/16Overall length - inch (OAL)5.6299Overall length - millimeter (OAL)143Point Angle (SIG)140Shank length - millimeter (LS)48Spiral formCTWUsable length (ULDR)5
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 140° |
| Basic Standard | DIN 6537 L |
| Coating | TiAlN |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Connection (shank) description | Cylindrical shank DIN 6535 HA |
| Connection diameter - inch (DCON MS) | 0.7087 |
| Connection diameter - millimeter (DCON MS) | 18 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - fractional inch (DC) | 11/16 |
| Cutting diameter - inch (DC) | 0.6874 |
| Cutting diameter - millimeter (DC) | 17.46 |
| Cutting diameter tolerance class (TCDC) | m7 |
| Drill Length | Jobber |
| EDP number | 623626 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 3.5827 |
| Length chip flute - millimeter (LCF) | 91 |
| Material | HM |
| MID number | 5979995 |
| Ordering code ANSI | R45311/16 |
| Overall length - inch (OAL) | 5.6299 |
| Overall length - millimeter (OAL) | 143 |
| Point Angle (SIG) | 140 |
| Shank length - millimeter (LS) | 48 |
| Spiral form | CTW |
| Usable length (ULDR) | 5 |
5979995
