Nexen 913118 Air Engaged Tooth Clutch
- Write a review
$2,524.97
Air chamber volume8.062 cm³Backlash0.35 °Bore detailsStraightBore size25 mm, Machined Bore with KeywayBore styleMachined Bore with KeywayCE certifiedCEClutch response factor0.763Drive inertia37.15 kgcm²Engagement methodAirFinishNickel platedHose length222 mmIEC IP ratingIP55Inlet size0.250-18 BSPTMInput keyway8W x 7H x 129.5L mm Full Length Key RecommendedInput shaft securement3 M6 Set Screws @ 120° On Both EndsLength129.5 mmMaterials of constructionNickel platedMax ambient temperature (°C)66Max operating pressure (bar)6.0Max Speed1350 RPMMax static clutch torque300 NmMin ambient temperature (°C)0Min engagement pressure (bar)1.4Min sprocket size35/40T, 40/32T, 50/26T, 60/22T, 80/17TMin static clutch torque68 NmMounting styleShaftNumber of engagement positions106Open or enclosed designEnclosedOuter Diameter6.16 mmOutput bolt circle102 mmOutput bolt hole size3, 4 M6-1.00 mm, Holes @ 120° And 90°Output configurationPilotPilot size88 mmPositioningNon-PositioningProduct featuresAir Engaged, Spring Released, Pilot Mount, Non-Positioning, EnclosedRelease methodSpringRestrictionsConsult Nexen For Use In Cyclic Applications Or Engagement At Differential SpeedsRoHS compliantRoHSShaft inertia9.36 kgcm²Unit height9 inUnit width7 in
Specifications
| Air chamber volume | 8.062 cm³ |
| Backlash | 0.35 ° |
| Bore details | Straight |
| Bore size | 25 mm, Machined Bore with Keyway |
| Bore style | Machined Bore with Keyway |
| CE certified | CE |
| Clutch response factor | 0.763 |
| Drive inertia | 37.15 kgcm² |
| Engagement method | Air |
| Finish | Nickel plated |
| Hose length | 222 mm |
| IEC IP rating | IP55 |
| Inlet size | 0.250-18 BSPTM |
| Input keyway | 8W x 7H x 129.5L mm Full Length Key Recommended |
| Input shaft securement | 3 M6 Set Screws @ 120° On Both Ends |
| Length | 129.5 mm |
| Materials of construction | Nickel plated |
| Max ambient temperature (°C) | 66 |
| Max operating pressure (bar) | 6.0 |
| Max Speed | 1350 RPM |
| Max static clutch torque | 300 Nm |
| Min ambient temperature (°C) | 0 |
| Min engagement pressure (bar) | 1.4 |
| Min sprocket size | 35/40T, 40/32T, 50/26T, 60/22T, 80/17T |
| Min static clutch torque | 68 Nm |
| Mounting style | Shaft |
| Number of engagement positions | 106 |
| Open or enclosed design | Enclosed |
| Outer Diameter | 6.16 mm |
| Output bolt circle | 102 mm |
| Output bolt hole size | 3, 4 M6-1.00 mm, Holes @ 120° And 90° |
| Output configuration | Pilot |
| Pilot size | 88 mm |
| Positioning | Non-Positioning |
| Product features | Air Engaged, Spring Released, Pilot Mount, Non-Positioning, Enclosed |
| Release method | Spring |
| Restrictions | Consult Nexen For Use In Cyclic Applications Or Engagement At Differential Speeds |
| RoHS compliant | RoHS |
| Shaft inertia | 9.36 kgcm² |
| Unit height | 9 in |
| Unit width | 7 in |
913118