Grundfos 96523613 CR15-2 Multistage Centrifugal Pump
- Write a review
$4,191.78
Actual impeller diameter104.8 mmApprovalsCURUSApprovals for drinking waterNSF/ANSI 61BaseCast ironBearingSICBuilt-in motor protectionPTCCode for rubberECode for shaft sealHQQEConnect codeGJCoolingTEFCCos phi - power factor0.89-0.86Curve tolerance2012 3BDensity998.2 kg/m³DOE pump energy index CL0.91Enclosure class (IEC 34-5)55 Dust/JettingFlange rating inlet300 lbFlange size for motor182TCFull load SF current16,2-15,0/8,40 AIE Efficiency classNEMA Premium / IE3 60HzImpellerStainless steelImpellers2Insulation class (IEC 85)FLiquid temperature range (°C)-20 - 120Low NPSHNMains frequency60 HzMaterial codeAMax pressure at stated temp (°C)16 bar / 120Maximum ambient temperature (°C)60Maximum head41.3 mMaximum operating pressure (bar)16ModelAMotor efficiency at 1/2 load86.9-84.7 %Motor efficiency at 3/4 load88.5-87.3 %Motor efficiency at full load88.5-88.5 %Motor no85904389Motor standardNEMAMotor type112CANumber of poles2Number of reduced-diameter impellers0Power (P2) required by pump3.7 kWPressure rating for connectionPN 25Product nameCR 15-2 A-GJ-A-E-HQQEProduct no96523613Pump orientationVerticalPump speed on which pump data are based3461 RPMPump versionAPumped liquidWaterRated current14,1-13,1/7,29 ARated flow20.5 m³/hRated head31.6 mRated power - P23.7 kWRated speed3525-3540 RPMRated voltage3 x 208-230YY/460Y VSelected liquid temperature (°C)20Service factor1.15Shaft seal arrangementSingleSize of inlet connectionDN 50Size of outlet connectionDN 50Stages2Starting current1000-1470 %Temperature (°C)16 bar / -20Type of connectionANSI / JIS
Specifications
| Actual impeller diameter | 104.8 mm |
| Approvals | CURUS |
| Approvals for drinking water | NSF/ANSI 61 |
| Base | Cast iron |
| Bearing | SIC |
| Built-in motor protection | PTC |
| Code for rubber | E |
| Code for shaft seal | HQQE |
| Connect code | GJ |
| Cooling | TEFC |
| Cos phi - power factor | 0.89-0.86 |
| Curve tolerance | 2012 3B |
| Density | 998.2 kg/m³ |
| DOE pump energy index CL | 0.91 |
| Enclosure class (IEC 34-5) | 55 Dust/Jetting |
| Flange rating inlet | 300 lb |
| Flange size for motor | 182TC |
| Full load SF current | 16,2-15,0/8,40 A |
| IE Efficiency class | NEMA Premium / IE3 60Hz |
| Impeller | Stainless steel |
| Impellers | 2 |
| Insulation class (IEC 85) | F |
| Liquid temperature range (°C) | -20 - 120 |
| Low NPSH | N |
| Mains frequency | 60 Hz |
| Material code | A |
| Max pressure at stated temp (°C) | 16 bar / 120 |
| Maximum ambient temperature (°C) | 60 |
| Maximum head | 41.3 m |
| Maximum operating pressure (bar) | 16 |
| Model | A |
| Motor efficiency at 1/2 load | 86.9-84.7 % |
| Motor efficiency at 3/4 load | 88.5-87.3 % |
| Motor efficiency at full load | 88.5-88.5 % |
| Motor no | 85904389 |
| Motor standard | NEMA |
| Motor type | 112CA |
| Number of poles | 2 |
| Number of reduced-diameter impellers | 0 |
| Power (P2) required by pump | 3.7 kW |
| Pressure rating for connection | PN 25 |
| Product name | CR 15-2 A-GJ-A-E-HQQE |
| Product no | 96523613 |
| Pump orientation | Vertical |
| Pump speed on which pump data are based | 3461 RPM |
| Pump version | A |
| Pumped liquid | Water |
| Rated current | 14,1-13,1/7,29 A |
| Rated flow | 20.5 m³/h |
| Rated head | 31.6 m |
| Rated power - P2 | 3.7 kW |
| Rated speed | 3525-3540 RPM |
| Rated voltage | 3 x 208-230YY/460Y V |
| Selected liquid temperature (°C) | 20 |
| Service factor | 1.15 |
| Shaft seal arrangement | Single |
| Size of inlet connection | DN 50 |
| Size of outlet connection | DN 50 |
| Stages | 2 |
| Starting current | 1000-1470 % |
| Temperature (°C) | 16 bar / -20 |
| Type of connection | ANSI / JIS |
96523613