Morse HT 10 CLUTCH 5/8 RH 0.625" Bore Size, HT Series CAM Clutch, HT10 Model, 42 ft-lbs. Rated Torque Capacity, 2.375" Overall D
- Write a review
$2,344.22
Additional Bearing Support RequirementNoBackstopping ClutchYesBearing Counterbore Diameter1.1811/1.1816Bore (Min) (in).4250/.4275Bore Size (in)0.625ConfigurationRHHeight3.75Indexing ClutchYesLength3.75Length Through Bore (in)1.563Lubrication TypeAutomatic Transmission Fluid - Must Be Added Before UseModelHT10Mounting Bolt Circle Diameter1.875Nominal Overrunning Drag (ft-lb)2.4Number of Tapped Mounting Holes4Overall Diameter (in)2.375Overall Width (in)2.125Overrunning ClutchYesProduct TypeHT SeriesRated Torque Capacity (ft.-lbs.)42Snap Ring Ball Brg (Unfurnished)200Tapped Hole Thread Size1/4-28TypeCAM ClutchesUseable depth of thread0.375Width1.5
Specifications
| Additional Bearing Support Requirement | No |
| Backstopping Clutch | Yes |
| Bearing Counterbore Diameter | 1.1811/1.1816 |
| Bore (Min) (in) | .4250/.4275 |
| Bore Size (in) | 0.625 |
| Configuration | RH |
| Height | 3.75 |
| Indexing Clutch | Yes |
| Length | 3.75 |
| Length Through Bore (in) | 1.563 |
| Lubrication Type | Automatic Transmission Fluid - Must Be Added Before Use |
| Model | HT10 |
| Mounting Bolt Circle Diameter | 1.875 |
| Nominal Overrunning Drag (ft-lb) | 2.4 |
| Number of Tapped Mounting Holes | 4 |
| Overall Diameter (in) | 2.375 |
| Overall Width (in) | 2.125 |
| Overrunning Clutch | Yes |
| Product Type | HT Series |
| Rated Torque Capacity (ft.-lbs.) | 42 |
| Snap Ring Ball Brg (Unfurnished) | 200 |
| Tapped Hole Thread Size | 1/4-28 |
| Type | CAM Clutches |
| Useable depth of thread | 0.375 |
| Width | 1.5 |
86409