Morse HT 30 CLUTCH 2 RH 2" Bore Size, HT Series CAM Clutch, HT30 Model, 440 ft-lbs. Rated Torque Capacity, 4.5" Overall Diameter
- Write a review
$3,518.06
Additional Bearing Support RequirementNoBackstopping ClutchYesBearing Counterbore Diameter2.8345/2.8350Bore (Min) (in)6.125/.6150Bore Size (in)2ConfigurationRHHeight5.88Indexing ClutchYesInner Race Width (in)2.063Length4.25Length Through Bore (in)2.063Lubrication TypeAutomatic Transmission Fluid - Must Be Added Before UseModelHT30Mounting Bolt Circle Diameter3.75Nominal Overrunning Drag (ft-lb)4Number of Tapped Mounting Holes6Outer Width (in)2.75Overall Diameter (in)4.5Overall Width (in)2.75Overrunning ClutchYesProduct TypeHT SeriesRated Torque Capacity (ft.-lbs.)440Snap Ring Ball Brg (Unfurnished)306/207Tapped Hole Thread Size3/8-24TypeCAM ClutchesUseable depth of thread0.469Width4.5
Specifications
| Additional Bearing Support Requirement | No |
| Backstopping Clutch | Yes |
| Bearing Counterbore Diameter | 2.8345/2.8350 |
| Bore (Min) (in) | 6.125/.6150 |
| Bore Size (in) | 2 |
| Configuration | RH |
| Height | 5.88 |
| Indexing Clutch | Yes |
| Inner Race Width (in) | 2.063 |
| Length | 4.25 |
| Length Through Bore (in) | 2.063 |
| Lubrication Type | Automatic Transmission Fluid - Must Be Added Before Use |
| Model | HT30 |
| Mounting Bolt Circle Diameter | 3.75 |
| Nominal Overrunning Drag (ft-lb) | 4 |
| Number of Tapped Mounting Holes | 6 |
| Outer Width (in) | 2.75 |
| Overall Diameter (in) | 4.5 |
| Overall Width (in) | 2.75 |
| Overrunning Clutch | Yes |
| Product Type | HT Series |
| Rated Torque Capacity (ft.-lbs.) | 440 |
| Snap Ring Ball Brg (Unfurnished) | 306/207 |
| Tapped Hole Thread Size | 3/8-24 |
| Type | CAM Clutches |
| Useable depth of thread | 0.469 |
| Width | 4.5 |
86417