NEXEN 802862 F-450 0.875, PILOT MOUNT, SPCL FLATNE
- Write a review
$933.66
Anti rotation styleOptional brake disc can stop output with optional caliper brakeApproximate clutch facing life345 hphrBore detailsStraightBore size22.225 mm, Machined Bore with Keyway, 0.500-0.750 in with Optional Adapter BushingsBore styleMachined Bore with Keyway, Nexen Adapter Bushing RequiredCE certifiedCEClutch air chamber volume when new0.266 in³Clutch air chamber volume when worn out0.695 in³Clutch facing edge color codeGreenClutch facing effective area11.93 in²Clutch Facing TypeLow CoefficientClutch heat sink capacity30000 ftlbClutch peak thermal input rate10.7 hpClutch response factor0.049Drive inertia4.7 lbin²EnclosureOpenEngagement methodAirFinishBlack oxideInlet size0.125 NPTInput bore min shaft insertion2 in, From Pilot End Full From Air Chamber EndInput keyway0.188 x 0.188 inMaterials of constructionBlack OxideMax ambient temperature150°FMax bore size22.225 mmMax clutch continuous thermal dissipation0.3 hpMax dynamic torque8.021923 NmMax Speed3600 RPMMin ambient temperature (°F)32Min bore size12.7 mmMin sprocket size25/48T, 35/32T, 40/25T, 50/21TMounting styleShaft MountOperating range (psi)3-85Outer Diameter4.56 inOutput bolt circle76.2 mmOutput bolt hole size4, 0.250-20 in, Holes @ 90°Output shaft styleNoneOutput typePilotPilot size63.5 mmRelease methodSpringRoHS compliantRoHSRPM3600Shaft inertia4.79 lbin²
Specifications
| Anti rotation style | Optional brake disc can stop output with optional caliper brake |
| Approximate clutch facing life | 345 hphr |
| Bore details | Straight |
| Bore size | 22.225 mm, Machined Bore with Keyway, 0.500-0.750 in with Optional Adapter Bushings |
| Bore style | Machined Bore with Keyway, Nexen Adapter Bushing Required |
| CE certified | CE |
| Clutch air chamber volume when new | 0.266 in³ |
| Clutch air chamber volume when worn out | 0.695 in³ |
| Clutch facing edge color code | Green |
| Clutch facing effective area | 11.93 in² |
| Clutch Facing Type | Low Coefficient |
| Clutch heat sink capacity | 30000 ftlb |
| Clutch peak thermal input rate | 10.7 hp |
| Clutch response factor | 0.049 |
| Drive inertia | 4.7 lbin² |
| Enclosure | Open |
| Engagement method | Air |
| Finish | Black oxide |
| Inlet size | 0.125 NPT |
| Input bore min shaft insertion | 2 in, From Pilot End Full From Air Chamber End |
| Input keyway | 0.188 x 0.188 in |
| Materials of construction | Black Oxide |
| Max ambient temperature | 150°F |
| Max bore size | 22.225 mm |
| Max clutch continuous thermal dissipation | 0.3 hp |
| Max dynamic torque | 8.021923 Nm |
| Max Speed | 3600 RPM |
| Min ambient temperature (°F) | 32 |
| Min bore size | 12.7 mm |
| Min sprocket size | 25/48T, 35/32T, 40/25T, 50/21T |
| Mounting style | Shaft Mount |
| Operating range (psi) | 3-85 |
| Outer Diameter | 4.56 in |
| Output bolt circle | 76.2 mm |
| Output bolt hole size | 4, 0.250-20 in, Holes @ 90° |
| Output shaft style | None |
| Output type | Pilot |
| Pilot size | 63.5 mm |
| Release method | Spring |
| RoHS compliant | RoHS |
| RPM | 3600 |
| Shaft inertia | 4.79 lbin² |
802862