Nexen 913138 Air Engaged Tooth Clutch
- Write a review
$2,131.45
Air chamber volume10.471 cm³Backlash0.30 °Bore detailsStraightBore size30 mm, Machined Bore with KeywayBore styleMachined Bore with KeywayCE certifiedCEClutch response factor0.087Drive inertia43.56 kgcm²Engagement methodAirFinishNickel platedHose length222 mmIEC IP ratingIP55Inlet size0.250-18 BSPTMMaterials of constructionNickel platedMax ambient temperature (°C)66Max operating pressure (bar)6.0Max Speed1350 RPMMax static clutch torque440 NmMin ambient temperature (°C)0Min engagement pressure (bar)1.4Min sprocket size35/45T, 40/34T, 50/28T, 60/24T, 80/18TMin static clutch torque102 NmMounting styleShaftNumber of engagement positions122Open or enclosed designEnclosedOutput configurationPilotPositioningNon-PositioningProduct featuresAir Engaged, Spring Released, Pilot Mount, Non-Positioning, EnclosedRelease methodSpringRestrictionsConsult Nexen For Use In Cyclic Applications Or Engagement At Differential SpeedsRoHS compliantRoHSShaft inertia14.30 kgcm²Unit height9 inUnit width7 in
Specifications
| Air chamber volume | 10.471 cm³ |
| Backlash | 0.30 ° |
| Bore details | Straight |
| Bore size | 30 mm, Machined Bore with Keyway |
| Bore style | Machined Bore with Keyway |
| CE certified | CE |
| Clutch response factor | 0.087 |
| Drive inertia | 43.56 kgcm² |
| Engagement method | Air |
| Finish | Nickel plated |
| Hose length | 222 mm |
| IEC IP rating | IP55 |
| Inlet size | 0.250-18 BSPTM |
| Materials of construction | Nickel plated |
| Max ambient temperature (°C) | 66 |
| Max operating pressure (bar) | 6.0 |
| Max Speed | 1350 RPM |
| Max static clutch torque | 440 Nm |
| Min ambient temperature (°C) | 0 |
| Min engagement pressure (bar) | 1.4 |
| Min sprocket size | 35/45T, 40/34T, 50/28T, 60/24T, 80/18T |
| Min static clutch torque | 102 Nm |
| Mounting style | Shaft |
| Number of engagement positions | 122 |
| Open or enclosed design | Enclosed |
| Output configuration | Pilot |
| Positioning | Non-Positioning |
| Product features | Air Engaged, Spring Released, Pilot Mount, Non-Positioning, Enclosed |
| Release method | Spring |
| Restrictions | Consult Nexen For Use In Cyclic Applications Or Engagement At Differential Speeds |
| RoHS compliant | RoHS |
| Shaft inertia | 14.30 kgcm² |
| Unit height | 9 in |
| Unit width | 7 in |
913138