- New
Morse HT 20 CLUTCH 1 1/8 RH 1.125" Bore Size, HT Series CAM Clutch, HT20 Model, 154 ft-lbs. Rated Torque Capacity, 3.5625" Overa
- Write a review
$3,367.41
Additional Bearing Support RequirementNoBackstopping ClutchYesBearing Counterbore Diameter2.0470/2.0475Bore (Min) (in).4875/.4900Bore Size (in)1.125ConfigurationRHHeight3Indexing ClutchYesLength4.38Length Through Bore (in)1.688Lubrication TypeAutomatic Transmission Fluid - Must Be Added Before UseModelHT20Mounting Bolt Circle Diameter2.75Nominal Overrunning Drag (ft-lb)3.4Number of Tapped Mounting Holes4Overall Diameter (in)3.563Overall Width (in)2.281Overrunning ClutchYesProduct TypeHT SeriesRated Torque Capacity (ft.-lbs.)154Snap Ring Ball Brg (Unfurnished)304/205Tapped Hole Thread Size5/16-24TypeCAM ClutchesUseable depth of thread0.375Width3.75
Specifications
| Additional Bearing Support Requirement | No |
| Backstopping Clutch | Yes |
| Bearing Counterbore Diameter | 2.0470/2.0475 |
| Bore (Min) (in) | .4875/.4900 |
| Bore Size (in) | 1.125 |
| Configuration | RH |
| Height | 3 |
| Indexing Clutch | Yes |
| Length | 4.38 |
| Length Through Bore (in) | 1.688 |
| Lubrication Type | Automatic Transmission Fluid - Must Be Added Before Use |
| Model | HT20 |
| Mounting Bolt Circle Diameter | 2.75 |
| Nominal Overrunning Drag (ft-lb) | 3.4 |
| Number of Tapped Mounting Holes | 4 |
| Overall Diameter (in) | 3.563 |
| Overall Width (in) | 2.281 |
| Overrunning Clutch | Yes |
| Product Type | HT Series |
| Rated Torque Capacity (ft.-lbs.) | 154 |
| Snap Ring Ball Brg (Unfurnished) | 304/205 |
| Tapped Hole Thread Size | 5/16-24 |
| Type | CAM Clutches |
| Useable depth of thread | 0.375 |
| Width | 3.75 |
86411
