Morse PB-5A CLUTCH .625B RH 0.625" Bore Size, PB Series CAM Clutch, PB-5A Model, 110 ft-lbs. Rated Torque Capacity, 2" Overall D
- Write a review
$1,223.29
Additional Bearing Support RequirementNoBackstopping ClutchYesBore Size (in)0.625ConfigurationRHGroove Diameter1.206/1.198Groove Width.048/.068Height3.3Hub Diameter (in)1Indexing ClutchYesKey for Bore Size3/16 x 3/32Keyway3/16 x 3/32Keyway Length (in)0.688Length3.4Length to Groove.900/.905Length to Snap Ring Groove (in)1.563Lubrication TypeAutomatic Transmission Fluid - Must Be Added Before UseMajor Diameter Width (in)1.25ModelPB-5AMounting Diameter (in)1.250/1.249Mounting Length (in)1Overall Diameter (in)2Overall Width (in)2.75Overrunning ClutchYesProduct TypePB SeriesRated Torque Capacity (ft.-lbs.)110RPM Max. - Inner Race1800RPM Max. - Outer Race900Snap Ring (Not Furnished)RS125TypeCAM ClutchesWidth3.8
Specifications
| Additional Bearing Support Requirement | No |
| Backstopping Clutch | Yes |
| Bore Size (in) | 0.625 |
| Configuration | RH |
| Groove Diameter | 1.206/1.198 |
| Groove Width | .048/.068 |
| Height | 3.3 |
| Hub Diameter (in) | 1 |
| Indexing Clutch | Yes |
| Key for Bore Size | 3/16 x 3/32 |
| Keyway | 3/16 x 3/32 |
| Keyway Length (in) | 0.688 |
| Length | 3.4 |
| Length to Groove | .900/.905 |
| Length to Snap Ring Groove (in) | 1.563 |
| Lubrication Type | Automatic Transmission Fluid - Must Be Added Before Use |
| Major Diameter Width (in) | 1.25 |
| Model | PB-5A |
| Mounting Diameter (in) | 1.250/1.249 |
| Mounting Length (in) | 1 |
| Overall Diameter (in) | 2 |
| Overall Width (in) | 2.75 |
| Overrunning Clutch | Yes |
| Product Type | PB Series |
| Rated Torque Capacity (ft.-lbs.) | 110 |
| RPM Max. - Inner Race | 1800 |
| RPM Max. - Outer Race | 900 |
| Snap Ring (Not Furnished) | RS125 |
| Type | CAM Clutches |
| Width | 3.8 |
172780