Morse NSS-8 CLUTCH 8 mm Bore Size, NSS Series CAM Clutch, NSS 8 Model, 4.9 ft-lbs. Rated Torque Capacity, 0.9" Overall Diameter,
- Write a review
$2,697.51
Additional Bearing Support RequirementYesBackstopping ClutchNoBore Size (in)0.315Bore Size (mm)8Drag Torque (lb-in)0.044Drag Torque (N-m)0.005Height1.2Indexing ClutchYesInner Race Width (in)0.3Keyway2 x 1.0Length2.6Lubrication TypeThe clutches are supplied with a protective coating of oil and must be lubricated before putting into service.Maximum Overrunning Speed - Inner Race (rpm)6000Maximum Overrunning Speed - Outer Race (rpm)3000ModelNSS 8Nominal Overrunning Drag (ft-lb)0.004Outer Width (in)0.3Overall Diameter (in)0.9Overrunning ClutchYesProduct TypeNSS SeriesRated Torque Capacity (ft.-lbs.)4.9Rated Torque Capacity (N-m)6.7TypeCAM ClutchesWidth2.5
Specifications
| Additional Bearing Support Requirement | Yes |
| Backstopping Clutch | No |
| Bore Size (in) | 0.315 |
| Bore Size (mm) | 8 |
| Drag Torque (lb-in) | 0.044 |
| Drag Torque (N-m) | 0.005 |
| Height | 1.2 |
| Indexing Clutch | Yes |
| Inner Race Width (in) | 0.3 |
| Keyway | 2 x 1.0 |
| Length | 2.6 |
| Lubrication Type | The clutches are supplied with a protective coating of oil and must be lubricated before putting into service. |
| Maximum Overrunning Speed - Inner Race (rpm) | 6000 |
| Maximum Overrunning Speed - Outer Race (rpm) | 3000 |
| Model | NSS 8 |
| Nominal Overrunning Drag (ft-lb) | 0.004 |
| Outer Width (in) | 0.3 |
| Overall Diameter (in) | 0.9 |
| Overrunning Clutch | Yes |
| Product Type | NSS Series |
| Rated Torque Capacity (ft.-lbs.) | 4.9 |
| Rated Torque Capacity (N-m) | 6.7 |
| Type | CAM Clutches |
| Width | 2.5 |
2363190