- New
Morse PB-12A CLUTCH 1.50B RH 1.5" Bore Size, PB Series CAM Clutch, PB-12A Model, 1350 ft-lbs. Rated Torque Capacity, 4.4375" Ove
- Write a review
$2,169.94
Additional Bearing Support RequirementNoBackstopping ClutchYesBore Size (in)1.5ConfigurationRHGroove Diameter2.391/2.379Groove Width.120/.130Height4.1Hub Diameter (in)2.375Indexing ClutchYesKey for Bore Size3/8 x 3/16Keyway3/8 x 3/16Keyway Length (in)1.125Length5.9Length to Groove1.311/1.321Length to Snap Ring Groove (in)2.063Lubrication TypeGreaseMajor Diameter Width (in)1.875ModelPB-12AMounting Diameter (in)2.500/2.499Mounting Length (in)1.438Overall Diameter (in)4.438Overall Width (in)3.875Overrunning ClutchYesProduct TypePB SeriesRated Torque Capacity (ft.-lbs.)1350RPM Max. - Inner Race1200RPM Max. - Outer Race300Snap Ring (Not Furnished)RST250TypeCAM ClutchesWidth5.3
Specifications
| Additional Bearing Support Requirement | No |
| Backstopping Clutch | Yes |
| Bore Size (in) | 1.5 |
| Configuration | RH |
| Groove Diameter | 2.391/2.379 |
| Groove Width | .120/.130 |
| Height | 4.1 |
| Hub Diameter (in) | 2.375 |
| Indexing Clutch | Yes |
| Key for Bore Size | 3/8 x 3/16 |
| Keyway | 3/8 x 3/16 |
| Keyway Length (in) | 1.125 |
| Length | 5.9 |
| Length to Groove | 1.311/1.321 |
| Length to Snap Ring Groove (in) | 2.063 |
| Lubrication Type | Grease |
| Major Diameter Width (in) | 1.875 |
| Model | PB-12A |
| Mounting Diameter (in) | 2.500/2.499 |
| Mounting Length (in) | 1.438 |
| Overall Diameter (in) | 4.438 |
| Overall Width (in) | 3.875 |
| Overrunning Clutch | Yes |
| Product Type | PB Series |
| Rated Torque Capacity (ft.-lbs.) | 1350 |
| RPM Max. - Inner Race | 1200 |
| RPM Max. - Outer Race | 300 |
| Snap Ring (Not Furnished) | RST250 |
| Type | CAM Clutches |
| Width | 5.3 |
172840
