- New
Chicago-Latrobe 11065 #35 6 IN A/C EXTENSION DRILL
- Write a review
$6.95
Applicable MaterialsAlloy Steel, Carbon Steel and Cast IronCutting Depth1-1/2 inCutting DirectionRight HandCutting Edge MaterialHSSDrill Size - Decimal Inch0.11 inDrill Size - Wire#35FinishBlack Oxide/Steam OxideFlute Length1-1/2 inFlute TypeSpiralMaterialHSSNumber of Flutes2Overall Length6 inPoint Angle135 degPoint TypeSplitSeries906Shank Size0.11 inShank TypeStraightStyle906Surface ConditionSteam OxideTool Size#35TypeType B Extra Length
Specifications
| Auxiliary lip | No |
| Design | HM8 |
| Housing bore diameter | 39.675 mm, 1.562 in |
| Maximum operating temperature | 100.0 °C, 212.0 °F |
| Maximum operating temperature (°F) | 100.0 °C, 212.0 |
| Minimum operating temperature | -40.0 °C, -40.0 °F |
| Minimum operating temperature (°F) | -40.0 °C, -40.0 |
| Permissible circumferential speed | 5.57 m/s |
| Rotational speed | 3723.0 r/min |
| Seal width | 4.775 mm, 0.188 in |
| Sealing lip material | Nitrile rubber (NBR) |
| Shaft diameter | 28.575 mm, 1.125 in |
| Type of outside diameter | Metal-cased |
| Unit system | Inch |
11065
