Morse NSS-30 CLUTCH 30 mm Bore Size, NSS Series CAM Clutch, NSS 30 Model, 77.4 ft-lbs. Rated Torque Capacity, 2.4" Overall Diame
- Write a review
$781.80
Additional Bearing Support RequirementYesBackstopping ClutchNoBore Size (in)1.181Bore Size (mm)30Drag Torque (lb-in)0.265Drag Torque (N-m)0.03Height1.1Indexing ClutchYesInner Race Width (in)0.6Keyway8 x 2.0Length2.6Lubrication TypeThe clutches are supplied with a protective coating of oil and must be lubricated before putting into service.Maximum Overrunning Speed - Inner Race (rpm)1800Maximum Overrunning Speed - Outer Race (rpm)900ModelNSS 30Nominal Overrunning Drag (ft-lb)0.022Outer Width (in)0.6Overall Diameter (in)2.4Overrunning ClutchYesProduct TypeNSS SeriesRated Torque Capacity (ft.-lbs.)77.4Rated Torque Capacity (N-m)105TypeCAM ClutchesWidth2.5
Specifications
| Additional Bearing Support Requirement | Yes |
| Backstopping Clutch | No |
| Bore Size (in) | 1.181 |
| Bore Size (mm) | 30 |
| Drag Torque (lb-in) | 0.265 |
| Drag Torque (N-m) | 0.03 |
| Height | 1.1 |
| Indexing Clutch | Yes |
| Inner Race Width (in) | 0.6 |
| Keyway | 8 x 2.0 |
| Length | 2.6 |
| Lubrication Type | The clutches are supplied with a protective coating of oil and must be lubricated before putting into service. |
| Maximum Overrunning Speed - Inner Race (rpm) | 1800 |
| Maximum Overrunning Speed - Outer Race (rpm) | 900 |
| Model | NSS 30 |
| Nominal Overrunning Drag (ft-lb) | 0.022 |
| Outer Width (in) | 0.6 |
| Overall Diameter (in) | 2.4 |
| Overrunning Clutch | Yes |
| Product Type | NSS Series |
| Rated Torque Capacity (ft.-lbs.) | 77.4 |
| Rated Torque Capacity (N-m) | 105 |
| Type | CAM Clutches |
| Width | 2.5 |
2363257