- New
Zero Max ETP-ER20 ETP 20mm ID Stainless Steel
- Write a review
$419.07
Actuation Screw to Center (R)18.0 mmActuation ScrewsM10Angle (V)56Dimension (D2)54.1 mmFlange Diameter (D1)51.5 mmFlat to Center (r)22.6 mmHub Bore Tolerance GradeH7Overall Length (L1)44 mmPolar Moment of Inertia1.66 x 10 lb-ftShaft Bore Diameter (d)20 mmShaft Tolerance Gradeh8Sleeve Diameter (D)24 mmSleeve Length (L)30 mmTightening torque3.69 ft-lbsTransmittable FA2, 046 lbfTransmittable FR225 lbfTransmittable T81 ft-lbs
Specifications
| Actuation Screw to Center (R) | 18.0 mm |
| Actuation Screws | M10 |
| Angle (V) | 56 |
| Dimension (D2) | 54.1 mm |
| Flange Diameter (D1) | 51.5 mm |
| Flat to Center (r) | 22.6 mm |
| Hub Bore Tolerance Grade | H7 |
| Overall Length (L1) | 44 mm |
| Polar Moment of Inertia | 1.66 x 10 lb-ft |
| Shaft Bore Diameter (d) | 20 mm |
| Shaft Tolerance Grade | h8 |
| Sleeve Diameter (D) | 24 mm |
| Sleeve Length (L) | 30 mm |
| Tightening torque | 3.69 ft-lbs |
| Transmittable FA | 2, 046 lbf |
| Transmittable FR | 225 lbf |
| Transmittable T | 81 ft-lbs |
ETP-ER20
