Zero Max ETP-ER1-3/8 ETP 1-3/8 ID Stainless Steel
- Write a review
$589.87
Actuation Screw to Center (R)26.4 mmActuation ScrewsM10Angle (V)60.5Dimension (D2)85.1 mmFlange Diameter (D1)73.0 mmFlat to Center (r)31.9 mmHub Bore Tolerance GradeH7Overall Length (L1)59 mmPolar Moment of Inertia7.36 x 10 lb-ftShaft Bore Diameter (d)34.93 mm (1.375 in)Shaft Tolerance Gradeh8Sleeve Diameter (D)42 mmSleeve Length (L)45 mmTightening torque3.69 ft-lbsTransmittable FA6, 744 lbfTransmittable FR562 lbfTransmittable T472 ft-lbs
Specifications
| Actuation Screw to Center (R) | 26.4 mm |
| Actuation Screws | M10 |
| Angle (V) | 60.5 |
| Dimension (D2) | 85.1 mm |
| Flange Diameter (D1) | 73.0 mm |
| Flat to Center (r) | 31.9 mm |
| Hub Bore Tolerance Grade | H7 |
| Overall Length (L1) | 59 mm |
| Polar Moment of Inertia | 7.36 x 10 lb-ft |
| Shaft Bore Diameter (d) | 34.93 mm (1.375 in) |
| Shaft Tolerance Grade | h8 |
| Sleeve Diameter (D) | 42 mm |
| Sleeve Length (L) | 45 mm |
| Tightening torque | 3.69 ft-lbs |
| Transmittable FA | 6, 744 lbf |
| Transmittable FR | 562 lbf |
| Transmittable T | 472 ft-lbs |
ETP-ER1-3/8
