- New
Zero Max ETP-ER30 ETP 30mm ID Stainless Steel
- Write a review
$532.00
Actuation Screw to Center (R)23.6 mmActuation ScrewsM10Angle (V)59Dimension (D2)71.0 mmFlange Diameter (D1)64.5 mmFlat to Center (r)29.1 mmHub Bore Tolerance GradeH7Overall Length (L1)54 mmPolar Moment of Inertia4.51 x 10 lb-ftShaft Bore Diameter (d)30 mmShaft Tolerance Gradeh8Sleeve Diameter (D)36 mmSleeve Length (L)40 mmTightening torque3.69 ft-lbsTransmittable FA4, 721 lbfTransmittable FR450 lbfTransmittable T280 ft-lbs
Specifications
| Actuation Screw to Center (R) | 23.6 mm |
| Actuation Screws | M10 |
| Angle (V) | 59 |
| Dimension (D2) | 71.0 mm |
| Flange Diameter (D1) | 64.5 mm |
| Flat to Center (r) | 29.1 mm |
| Hub Bore Tolerance Grade | H7 |
| Overall Length (L1) | 54 mm |
| Polar Moment of Inertia | 4.51 x 10 lb-ft |
| Shaft Bore Diameter (d) | 30 mm |
| Shaft Tolerance Grade | h8 |
| Sleeve Diameter (D) | 36 mm |
| Sleeve Length (L) | 40 mm |
| Tightening torque | 3.69 ft-lbs |
| Transmittable FA | 4, 721 lbf |
| Transmittable FR | 450 lbf |
| Transmittable T | 280 ft-lbs |
ETP-ER30
