Zero Max ETP-ER3/4 ETP 3/4 ID Stainless Steel
- Write a review
$419.07
Actuation Screw to Center (R)17.4 mmActuation ScrewsM10Angle (V)55Dimension (D2)53.0 mmFlange Diameter (D1)50.5 mmFlat to Center (r)21.9 mmHub Bore Tolerance GradeH7Overall Length (L1)42 mmPolar Moment of Inertia1.42 x 10 lb-ftShaft Bore Diameter (d)19.05 mm (0.750 in)Shaft Tolerance Gradeh8Sleeve Diameter (D)23 mmSleeve Length (L)28 mmTightening torque3.69 ft-lbsTransmittable FA1, 641 lbfTransmittable FR225 lbfTransmittable T63 ft-lbs
Specifications
| Actuation Screw to Center (R) | 17.4 mm |
| Actuation Screws | M10 |
| Angle (V) | 55 |
| Dimension (D2) | 53.0 mm |
| Flange Diameter (D1) | 50.5 mm |
| Flat to Center (r) | 21.9 mm |
| Hub Bore Tolerance Grade | H7 |
| Overall Length (L1) | 42 mm |
| Polar Moment of Inertia | 1.42 x 10 lb-ft |
| Shaft Bore Diameter (d) | 19.05 mm (0.750 in) |
| Shaft Tolerance Grade | h8 |
| Sleeve Diameter (D) | 23 mm |
| Sleeve Length (L) | 28 mm |
| Tightening torque | 3.69 ft-lbs |
| Transmittable FA | 1, 641 lbf |
| Transmittable FR | 225 lbf |
| Transmittable T | 63 ft-lbs |
ETP-ER3/4
