- New
Zero Max ETP-ER1-1/2 ETP 1-1/2 ID Stainless Steel
- Write a review
$794.27
Actuation Screw to Center (R)31.0 mmActuation ScrewsM16Angle (V)58Dimension (D2)89.5 mmFlange Diameter (D1)84.5 mmFlat to Center (r)36.6 mmHub Bore Tolerance GradeH7Overall Length (L1)72 mmPolar Moment of Inertia18.04 x 10 lb-ftShaft Bore Diameter (d)38.10 mm (1.500 in)Shaft Tolerance Gradeh8Sleeve Diameter (D)46 mmSleeve Length (L)52 mmTightening torque15.49 ft-lbsTransmittable FA8, 542 lbfTransmittable FR629 lbfTransmittable T656 ft-lbs
Specifications
| Actuation Screw to Center (R) | 31.0 mm |
| Actuation Screws | M16 |
| Angle (V) | 58 |
| Dimension (D2) | 89.5 mm |
| Flange Diameter (D1) | 84.5 mm |
| Flat to Center (r) | 36.6 mm |
| Hub Bore Tolerance Grade | H7 |
| Overall Length (L1) | 72 mm |
| Polar Moment of Inertia | 18.04 x 10 lb-ft |
| Shaft Bore Diameter (d) | 38.10 mm (1.500 in) |
| Shaft Tolerance Grade | h8 |
| Sleeve Diameter (D) | 46 mm |
| Sleeve Length (L) | 52 mm |
| Tightening torque | 15.49 ft-lbs |
| Transmittable FA | 8, 542 lbf |
| Transmittable FR | 629 lbf |
| Transmittable T | 656 ft-lbs |
ETP-ER1-1/2
