Dodge 130358 TB-SC-40M Bore Diameter: 40 Millimeter Housing: Tap Based Pillow Block Locking: Set Screw40mm bore Tap Based Ball B
- Write a review
$163.88
ApplicationGeneral PurposeBall bearing series208 seriesBase to center height1.9400 in, 49.276 mmBearing typeBall, ballBolt Diameter0.5000 inBolt to bolt max3.5000 in, 88.9 mmBolt to bolt min3.5000 in, 88.9 mmBore40mmBore length1.9400 in, 49.276 mmDutyStandard DutyExpansionNoExpansion capabilityNon-expansion (fixed)FinishPowder coatedGreasableYesHigh tempNoHousing constructionSolidHousing materialCast ironHousing optionCast ironHousing typeTapped-base pillow blockI.D.40 mmInsert materialSteelInsert optionBearing steelInsert typeBall BearingLockingSet screwLubrication typeGreaseMaterialSteelMax RPM5000 rpmMax Speed3500 RPMRelubricationYesRolling elementStandard duty ballSealSingle lipSeal optionDualGuard seals with flingersSensor readyAdapter requiredShaft attachmentSetscrewShaft diameter40.0000 mmStandoff housingNoStatic load capacity4475 lbf, 19905.792 NSuitable for high temperatureNoSuitable for washdownNoTypeTap based
Specifications
| Application | General Purpose |
| Ball bearing series | 208 series |
| Base to center height | 1.9400 in, 49.276 mm |
| Bearing type | Ball, ball |
| Bolt Diameter | 0.5000 in |
| Bolt to bolt max | 3.5000 in, 88.9 mm |
| Bolt to bolt min | 3.5000 in, 88.9 mm |
| Bore | 40mm |
| Bore length | 1.9400 in, 49.276 mm |
| Duty | Standard Duty |
| Expansion | No |
| Expansion capability | Non-expansion (fixed) |
| Finish | Powder coated |
| Greasable | Yes |
| High temp | No |
| Housing construction | Solid |
| Housing material | Cast iron |
| Housing option | Cast iron |
| Housing type | Tapped-base pillow block |
| I.D. | 40 mm |
| Insert material | Steel |
| Insert option | Bearing steel |
| Insert type | Ball Bearing |
| Locking | Set screw |
| Lubrication type | Grease |
| Material | Steel |
| Max RPM | 5000 rpm |
| Max Speed | 3500 RPM |
| Relubrication | Yes |
| Rolling element | Standard duty ball |
| Seal | Single lip |
| Seal option | DualGuard seals with flingers |
| Sensor ready | Adapter required |
| Shaft attachment | Setscrew |
| Shaft diameter | 40.0000 mm |
| Standoff housing | No |
| Static load capacity | 4475 lbf, 19905.792 N |
| Suitable for high temperature | No |
| Suitable for washdown | No |
| Type | Tap based |
TB-SC-40M