System Plast UCFQ206-19-SS-NC 1.188" Bore Size, Standard Duty Mounted Nolu-Clean Four Bolt Flange Ball Bearing, 400 Series Stain
- Write a review
$197.70
Ability to RelubricateYesBearing TypeStandard DutyBolt Size (in)7/16Bolt Spacing (in)3.25Bore GeometryStraightBore Size (in)1.188Cage MaterialStainless SteelCage TypeBall Riding RetainerDynamic Load Rating (lb)2529End Cap AvailableYesFixed vs. ExpansionFixedFoot Height (in)0.5Height2.7HousingNolu-CleanHousing ColorWhiteHousing ConstructionOne PieceHousing StyleFlange BlockHousing TypeFlange, Four BoltInner Race Heat Treat MethodThrough Hardened annealed setscrew areaInner Ring O.D. (in)1.594InsertSS-SB206-19 RGInsert Material400 Series Stainless SteelLength5.2Length Through Bore (in)1.188LockingSetscrewLubricantNSF H1 Food Grade GreaseMax Operating Temperature (F)180Maximum Speed (RPM)2900Measure UnitsInchMisalignment Capability±1.0° Misalignment - Static OnlyMisalignment TypeStatic OnlyOperating Temperature Range (F)30 to 180Outer Ring Land ProfileStandardOverall Height (in)1.453Overall Height to End Cap (in)2.06Overall Length (in)4.25Overall Width (in)4.25Pilot ConfigurationNo PilotRadial ClearanceStandardRolling ElementBall BearingSeal TypeSingle Lip Contact SealSetscrew Torque (in-lbs)50Size Code206Static Load (lbs)1888Width4.8
Specifications
| Ability to Relubricate | Yes |
| Bearing Type | Standard Duty |
| Bolt Size (in) | 7/16 |
| Bolt Spacing (in) | 3.25 |
| Bore Geometry | Straight |
| Bore Size (in) | 1.188 |
| Cage Material | Stainless Steel |
| Cage Type | Ball Riding Retainer |
| Dynamic Load Rating (lb) | 2529 |
| End Cap Available | Yes |
| Fixed vs. Expansion | Fixed |
| Foot Height (in) | 0.5 |
| Height | 2.7 |
| Housing | Nolu-Clean |
| Housing Color | White |
| Housing Construction | One Piece |
| Housing Style | Flange Block |
| Housing Type | Flange, Four Bolt |
| Inner Race Heat Treat Method | Through Hardened annealed setscrew area |
| Inner Ring O.D. (in) | 1.594 |
| Insert | SS-SB206-19 RG |
| Insert Material | 400 Series Stainless Steel |
| Length | 5.2 |
| Length Through Bore (in) | 1.188 |
| Locking | Setscrew |
| Lubricant | NSF H1 Food Grade Grease |
| Max Operating Temperature (F) | 180 |
| Maximum Speed (RPM) | 2900 |
| Measure Units | Inch |
| Misalignment Capability | ±1.0° Misalignment - Static Only |
| Misalignment Type | Static Only |
| Operating Temperature Range (F) | 30 to 180 |
| Outer Ring Land Profile | Standard |
| Overall Height (in) | 1.453 |
| Overall Height to End Cap (in) | 2.06 |
| Overall Length (in) | 4.25 |
| Overall Width (in) | 4.25 |
| Pilot Configuration | No Pilot |
| Radial Clearance | Standard |
| Rolling Element | Ball Bearing |
| Seal Type | Single Lip Contact Seal |
| Setscrew Torque (in-lbs) | 50 |
| Size Code | 206 |
| Static Load (lbs) | 1888 |
| Width | 4.8 |
70206CG/SS-EC