System Plast UCFH207-23-NC-OEC 1.438" Bore Size, Standard Duty Mounted Nolu-Clean Two Bolt Flange Ball Bearing, 52100 Bearing St
- Write a review
$149.30
Ability to RelubricateYesBackside Shield/SealBack Seal Installed in HousingBearing TypeStandard DutyBolt SizeM12Bolt Size (in)1/2Bolt Spacing (in)5.125Bore GeometryStraightBore Size (in)1.438Cage MaterialSteelCage TypeBall Riding RetainerDynamic Load Rating (lb)4429End Cap AvailableYesFixed vs. ExpansionFixedFoot Height (in)0.63Grease Fitting Thread SizeM6Height2.44HousingNolu-CleanHousing ColorWhiteHousing ConstructionOne PieceHousing StyleFlange BlockHousing TypeFlange, Two BoltInner Ring O.D. (in)1.844InsertSB207-23 RGInsert Material52100 Bearing SteelLength6.42Length Through Bore (in)1.25LockingSetscrewLubricantNSF H1 Food Grade GreaseMax Operating Temperature (C)82Max Operating Temperature (F)180Maximum Speed (RPM)2600Measure UnitsInchMisalignment Capability±1.0° Misalignment - Static OnlyMisalignment TypeStatic OnlyOuter Ring Land ProfileStandardOverall Height (in)1.719Overall Length (in)6.42Overall Width (in)3.53Pilot ConfigurationNo PilotRadial ClearanceStandardRolling ElementBall BearingSeal TypeSingle Lip Contact SealSetscrew Torque (in-lbs)100Size Code207Static Load (lbs)3440Width3.54
Specifications
| Ability to Relubricate | Yes |
| Backside Shield/Seal | Back Seal Installed in Housing |
| Bearing Type | Standard Duty |
| Bolt Size | M12 |
| Bolt Size (in) | 1/2 |
| Bolt Spacing (in) | 5.125 |
| Bore Geometry | Straight |
| Bore Size (in) | 1.438 |
| Cage Material | Steel |
| Cage Type | Ball Riding Retainer |
| Dynamic Load Rating (lb) | 4429 |
| End Cap Available | Yes |
| Fixed vs. Expansion | Fixed |
| Foot Height (in) | 0.63 |
| Grease Fitting Thread Size | M6 |
| Height | 2.44 |
| Housing | Nolu-Clean |
| Housing Color | White |
| Housing Construction | One Piece |
| Housing Style | Flange Block |
| Housing Type | Flange, Two Bolt |
| Inner Ring O.D. (in) | 1.844 |
| Insert | SB207-23 RG |
| Insert Material | 52100 Bearing Steel |
| Length | 6.42 |
| Length Through Bore (in) | 1.25 |
| Locking | Setscrew |
| Lubricant | NSF H1 Food Grade Grease |
| Max Operating Temperature (C) | 82 |
| Max Operating Temperature (F) | 180 |
| Maximum Speed (RPM) | 2600 |
| Measure Units | Inch |
| Misalignment Capability | ±1.0° Misalignment - Static Only |
| Misalignment Type | Static Only |
| Outer Ring Land Profile | Standard |
| Overall Height (in) | 1.719 |
| Overall Length (in) | 6.42 |
| Overall Width (in) | 3.53 |
| Pilot Configuration | No Pilot |
| Radial Clearance | Standard |
| Rolling Element | Ball Bearing |
| Seal Type | Single Lip Contact Seal |
| Setscrew Torque (in-lbs) | 100 |
| Size Code | 207 |
| Static Load (lbs) | 3440 |
| Width | 3.54 |
79207CGR-EC