- New
Specifications:Discrete Input ChannelsGuaranteed ON voltage: 9 VDCGuaranteed OFF voltage: 5.0 VDCGuaranteed OFF current: 2 mA DCInput resistance: 10 KohmsInput current (@ 24 VDC) 3 mAInput Protection: High Impedance with overvoltage protectionFiltered ON/OFF delay: 25 ms (20 Hz. max. counting rate)Fastest response: 1 ms (400 Hz. max. counting rate)Special fast counting rate: Up to 50 KHz on channels 1 and 2Pulse Counting Options: Count up, pulse timing and pulse rate 16 or 32 bit reportingScan rate (all channels) 1 msDiscrete Output ChannelsOutput voltage range 10-30 VDCMax. output power: 1A per channels, 8A per module, .8A at 60°C 1 channel, .4A at 60°C 8channels at 24 VDCMax. off state leakage: 0.01 mA (less than 10 uA)Short circuit protection, self-reset fuses (trip above 1.5 Amp)Min. load: 1 mAInrush current: 5 Amps (100 ms surge)Typical on resistance: 0.3 Ohms (Drop 0.3 VDC @ 1 Amp)All channels Scan rate: 1 msAnalog Input ChannelsAnalog Input Range: 4-20 mAA/D resolution 16 bits (0.003%) 10 bits (fast option)Full scale accuracy: +/- 0.02% (at 20 °C, 16 bit mode)Temperature coefficient +/- 50 ppm per °C (span and offset)Input impedance (resistance): 100 ohmsProtection: Self-resetting short circuit protection fusesDMRR (differential mode) 66 db at 50/60 HzFastest update time [# of chan.]: 880 ms [all] -16-bit; 145 ms [all] -14-bit; 1 ms [2] -10-bitAnalog Output ChannelsAnalog output range: 4-20 mAD/A resolution 16 bits (less than 1 uA)Full scale accuracy +/-0.02% (at 20°C)Span and offset temp. +/- 50 ppm per °C typ.Max. output settling time 5 ms (to .05%)Load resistance (@ 24 V) 0-750 OhmsLoad resistance (@ 10V) 300 OhmsCurrent limiting short circuit protectionEnvironmentalOperating temperature: -40 to 75°CMTBF: 1,308,009 Hours GB @ 40°C per MIL-HNDBK-217F2ConfigurationConfigured using Sixnet I/O Tool KitGraphical User Interface (GUI)